Humminbird LCR 400 ID Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro ne Humminbird LCR 400 ID. Humminbird LCR 400 ID User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 28
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Zobrazit stránku 0
1 2 3 4 5 6 ... 27 28

Shrnutí obsahu

Strany 2 - TABLE OF CONTENTS

INSTALLING THE LCR The LCR should be mounted on a flat, solid surface for maximum stability. The low profile swivel mount has four holes drilled in

Strany 3

OTHER MOUNTING OPTIONS 1. The LCR gimbal bracket can also be mounted on the SM-4, quick disconnect swivel mount. 2. The LCR gimbal bracket can al

Strany 4

“Transducer”. Note: An adapter (AD-4) is available to allow use of an old waterproof (BNC) transducer with the LCR, but be sure that the transducer i

Strany 5

you will install on the transom or inside the hull, and the LCR 400ID unit which you will mount with the supplied gimbal bracket. The transducer and L

Strany 6

BEFORE BEGINNING THE HUMMINBIRD ADVANTAGE THE HUMMINBIRD ADVANTAGE The LCR 400ID incorporates the best of available technologies, and offers advanta

Strany 7

USING THE LCR400ID USING THE BUILT-IN SIMULATOR USING THE LCR400ID This section provides complete information on operating the LCR 400ID through its

Strany 8

USING THE LCR400ID OPERATING THE LCR400ID FRONT PANEL BUTTONS The LCR 400ID offers several functions that you can adjust with the front panel button

Strany 9 - CAUTIONS

USING THE LCR400ID OPERATING THE LCR400ID SENSITIVITY 1. Selecting Sensitivity/Units; Factory setting: +0/FEET The Sensitivity/Units function has

Strany 10

USING THE LCR400ID OPERATING THE LCR400ID FISH ALARM 3. Enabling Fish Alarm; Factory Setting: OFF The Fish Alarm alerts you with a chirping sound

Strany 11

USING THE LCR400ID OPERATING THE LCR400ID BOTTOM LOCK 5. Using Bottom-Lock; Factory Setting: OFF Bottom-lock provides an up-close view like Zoom,

Strany 12 - BEFORE BEGINNING

TABLE OF CONTENTS INSTALLATION PREPARATION………………………………………………………. 2 Parts Supplied……………………………………………………………………. 2 Accessories…………………………………………………………………

Strany 13

USING THE LCR400ID OPERATING THE LCR400ID DEPTH RANGE 7. Setting Depth Range; Factory Setting: On (Automatic) When you turn the LCR 400ID on, it

Strany 14

SPECIFICATIONS Operating Frequency 200 KHz Power Requirements 10-16 Volts Power Cable Length Standard Unit 48” Portable Unit Non-replaceable T

Strany 15 - USING THE LCR400ID

MAINTENANCE AND WARRANTY MAINTENANCE MAINTENANCE Your Humminbird fishfinder is designed to provide years of trouble free operation with virtually no

Strany 16

MAINTENANCE AND WARRANTY TROUBLESHOOTING TROUBLESHOOTING Do not attempt to repair the fishfinder yourself. There are no user serviceable parts insid

Strany 17

MAINTENANCE AND WARRANTY TROUBLESHOOTING Second, inspect the transducer cable from end to end for breaks, kinks, or cuts in the outer casing of the c

Strany 18

MAINTENANCE AND WARRANTY TROUBLESHOOTING 5. The unit comes on before I press POWER, and won't turn off. Check the transducer cable. If the out

Strany 19

MAINTENANCE AND WARRANTY WARRANTY HUMMINBIRD ONE YEAR FULL WARRANTY First year repairs (from original date of purchase) on your Humminbird fishfinde

Strany 20

MAINTENANCE AND WARRANTY SERVICE POLICY SERVICE POLICY This Service Policy is valid in the United States only. This applies to Humminbird units retu

Strany 21 - SPECIFICATIONS

MAINTENANCE AND WARRANTY CUSTOMER SUPPORT CUSTOMER SUPPORT If you have any questions, call our Humminbird Customer Support Hotline: 1-334-687-0503

Strany 22 - MAINTENANCE AND WARRANTY

TRANSDUCER MOUNTING PROCEDURE Humminbird’s high-speed transducer is supplied with your LCR. This transducer has been designed to give good high speed

Strany 23

absorb the blow of any obstruction by rotating up out of the metal spring bracket without harming the transducer, or your boat. The transducer can be

Strany 24

aluminum boat locate the template on the transom between rows of rivets, or ribs that are on the bottom of the boat. Align the template so that the

Strany 25

NOTE: On boats with more than 15 degree deadrise angle it may be necessary to mount the transducer slightly off parallel with the water level. (See

Strany 26

Step 4 TRANSDUCER ASSEMBLY- Insert the transducer assembly into the metal bracket from the bottom. Push up until the holes in the plastic pivot ali

Strany 27

using the 5/32” allen wrench provided. The screws are visible through the access holes on each side of the metal bracket. Check to make sure the trans

Strany 28

4. Put transducer in the water. The bottom of the transducer should be in a flat area and should be in good contact with the bottom of the boat. 5.

Komentáře k této Příručce

Žádné komentáře